Search for:

MITSUBISHI PLC

FX Series

 
The FX family of PLC’s has a proven development lineage spanning more than 10 years. The three current models, the FX1S, offer a range of processing speeds, number of applied (complex) instructions and options from 10 I/O up to 256 I/O.See the following ranges for suitable digital, analogue and communication expansion modules and programming software.

FX1S Series

Offers powerful control features in an ultra small package. It is ideally suited to smaller I/O applications where future expansion will not be required. In addition to the features already listed, the FX1S also offers the following:
 
Choice of 10, 14, 20 and 30 fixed I/O sizes
85 applied instructions, 512 auxiliary relays, 64 timers, 32 counters, 256 data registers
2000 step EEPROM program memory (no backup battery required)

Product features

1.All have 24Vdc inputs which can be configured as sink or source
2.27 basic instructions
3.Networking/communications ability using optional RS-232, RS-422 and RS-485 modules
4.60kHz high speed counter
5.DIN rail or surface mount
6.Password security
7.Real time clock and Run/Stop switch built in
8.Choice of relay or transistor output models
9.Relay outputs rated 240Vac or 30Vdc, up to 2A per point max.
10.Transistor outputs rated 5V to 30Vdc, up to 0.5A per point max.
11.Program using GX developer FX software stock no. 399-7806
12.Choice of ac or dc powered models (FX2N is ac only)
13.ac type supply voltage 100-240Vac +10% -15%, 50/60Hz
14.dc type supply voltage 24Vdc +20% -15%
15.0.55 to 0.7μs/basic instruction processing speed
16.Optional data display stock no. 383-0258 available
17.Two potentiometers built in for adjusting timers etc
18.24Vdc 400mA output for sensors etc on ac powered units

FX3U Series

Memory
64,000 step RAM memory built-in. Flash memory cassette can also be mounted.
Processing speed
Basic instruction: 0.065 μs/instruction (LD instruction) Application instruction: 0.642 to 100 μs/instruction
Device
Auxiliary relay: 7,680 pts Timer: 512 pts Counter: 235 pts Data register: 8,000 pts
Extension register: 32,768 pts Extension file register (optional memory): 32,768 pts

1.Controllable I/O: 16 – 384 points with CC-Link or AS-i remote I/O

2.Main Unit I/O: 16/32/48/64/80/128 points

3.Exchangeable communication expansion boards that mount directly into the main unit (USB, RS-232C, RS-422, RS-485)

4.Simultaneous memory cassette and display module mounting available

5.Integrated real-time clock

6.All-in-one CPU, power supply and I/O. Includes many upgraded fea­tures from the FX2N, including high expandability using 7.Expansion Boards and Special Adapters to add functionality

8.Basic Instructions: 0.065 μs / instruction (Contact Instruction) Applied Instructions: 0.642 μs / instruction (MOV Instruction)

9.64,000 steps of built-in program memory